Approval of Heavy Vehicle Modifications - Tasmania

Service summary

You will require this approval if you intend to modify a heavy vehicle. This approval is needed for modifications that can affect the safety of the heavy vehicle.

Minor modifications that do not cause the vehicle to become non-compliant with vehicle standards do not require this approval. Examples include additional lighting, aerials, air conditioning and alarm systems.

There are two categories of heavy vehicle modifications that require approval:

  • Modifications that are outlined in the attached code of practice. These include complex modifications that can affect the safety of a vehicle if not performed property. The modifications are based on accepted vehicle engineering practices and the requirements. If your modification falls under the code of practice, then you will require approval from an approved vehicle examiner to modify your vehicle; and
  • Modifications that are outside the scope of the code of practice that may cause the vehicle to be non-compliant with a heavy vehicle standard. These modifications are usually significant or extensive modifications that have the potential to seriously affect the safety of the vehicle and its operation on the road. They may affect the vehicle design, strength, structural integrity and handling characteristics. These modifications require both the approval of an approved vehicle examiner and the Regulator.

A heavy vehicle is a vehicle with a gross vehicle mass (GVM) or an aggregate trailer mass (ATM) of more than 4.5 tonnes.

Please consult the Contact Officer for more information.

Service type

Licence

A licence defines the need to obtain recognition / certification and registration to undertake a certain business activity.

Eligibility requirements

To be eligible for this approval, you must:

  • Prove that the use of a modified vehicle will not pose significant safety risks; and
  • Comply with noise and emission standards, unless otherwise exempted.

Please consult the Contact Officer for more information regarding eligibility requirements.

Fees

 TypeDescription
ApplyApplication

Please consult the Contact Officer for information on fees to be submitted.

Forms

Administering agency

National Heavy Vehicle Regulator

Act(s) name

Heavy Vehicle National Law (Tasmania) Act 2013 (Tasmania)

Regulation(s) name

Heavy Vehicle National Law (Tasmania) Regulations 2014 (Tasmania)

Contact details

Enquiries, Vehicle Standards Unit
National Heavy Vehicle Regulator


Mailing address:
PO Box 492
Fortitude Valley
Queensland 4006

Phone:

1300 696 487

Fax:

1300 736 798
vehiclestandards@nhvr.gov.au

Supporting information

Disclaimer

The information contained on the Australian Business Licence and Information Service (ABLIS) web site, or via packages or other sources is intended for general guidance only.

To the full extent permitted by law, the Federal, State, Territory and Local Governments make no representations or warranties (expressed or implied) in relation to the information, including its accuracy, currency or completeness.

The business information provided does not constitute professional or legal advice, nor is the use of any third party resource an endorsement of the information contained, the associated organisation, product or service. It is recommended that you obtain appropriate professional and /or independent legal advice to ensure that the material provided here is relevant to your particular circumstances.

To the full extent permitted by law the Federal, State, Territory and Local Governments, their employees and agents do not accept any liability for any reason, including without limitation, liability in negligence, to any person for the general information which is provided herein, or in respect of anything, including the consequences of anything done, or not done, by any such person in whole or partial reliance upon the information.