Australian Standard AS 4041- Pressure Piping - Western Australia

Service summary

You will be required to comply with this standard if you intend to undertake gas fitting work and / or manufacture pressure piping.

A fitting line or fitting on a consumer's gas installation that is to operate at a pressure exceeding 200 kPa must comply with this standard (for above ground steel piping).

This standard sets out minimum requirements for the materials, design, fabrication, testing, inspection, reports and pre-commissioning of piping subject to internal pressure or external pressure or both. Specific requirements are given for piping constructed of carbon, carbon-manganese, low alloy and high alloy steels, ductile and cast iron, copper, aluminium, nickel, titanium and alloys of these materials. General requirements and reference to standards for non-metallic piping are included.

Please consult the Contact Officer for more information and to ascertain the level of compliance that may be required.

Service type

Code of Practice

A code of practice can be either a legal requirement or non-legal requirement. Legal codes of practice are defined as a result of legislation. Non-legal codes of practice are defined by industry regulators and bodies.

Other resources

 Resources
Comply AS 4041-2006 Pressure Piping Opens in a new browser window

Administering agency

Department of Commerce
EnergySafety

Act(s) name

Gas Standards Act 1972 (Western Australia)

Regulation(s) name

Gas Standards (Gasfitting and Consumer Gas Installations) Regulations 1999 (Western Australia)

Contact details

Licensing Enquiries
Department of Commerce
EnergySafety


Operating address:
Level 1, Mason Bird Building
303 Sevenoaks Street
Cannington
Western Australia 6107
Mailing address:
Locked Bag 14
Cloisters Square PO
Western Australia 6850

Phone:

1800678198

Phone:

08 62512000

Fax:

08 62511902
energylicensing@commerce.wa.gov.au

Supporting information

Disclaimer

The information contained on the Australian Business Licence and Information Service (ABLIS) web site, or via packages or other sources is intended for general guidance only.

To the full extent permitted by law, the Federal, State, Territory and Local Governments make no representations or warranties (expressed or implied) in relation to the information, including its accuracy, currency or completeness.

The business information provided does not constitute professional or legal advice, nor is the use of any third party resource an endorsement of the information contained, the associated organisation, product or service. It is recommended that you obtain appropriate professional and /or independent legal advice to ensure that the material provided here is relevant to your particular circumstances.

To the full extent permitted by law the Federal, State, Territory and Local Governments, their employees and agents do not accept any liability for any reason, including without limitation, liability in negligence, to any person for the general information which is provided herein, or in respect of anything, including the consequences of anything done, or not done, by any such person in whole or partial reliance upon the information.