Australian Standard AS 1033.2 - 1988 High Voltage Fuses (for Rated Voltages Exceeding 1000V) - Current Limiting (Powder Filled) Type - Western Australia

Service summary

You must comply with this standard if you are an electricity network operator or electrical contractor and intend to design, construct, commission, operate, maintain or decommission an electricity network.

This standard specifies requirements for all types of high voltage current-limiting (powder-filled) fuses designed for use outdoors or indoors on alternating current systems of 50 hertz and 60 hertz and of rated voltages exceeding 1000 volts. Fuses provided with fuse-links equipped with an indicating device or a striker come within the scope of this Standard, but the correct operation of the striker in combination with the tripping device of a switch is outside the scope of this Standard. This Standard does not cover expulsion and similar type fuses or the application of high voltage fuses. Please consult the Contact Officer for more information and to ascertain the level of compliance that may be required by your business.

Service type

Code of Practice

A code of practice can be either a legal requirement or non-legal requirement. Legal codes of practice are defined as a result of legislation. Non-legal codes of practice are defined by industry regulators and bodies.

Administering agency

Department of Commerce
EnergySafety

Act(s) name

Electricity Act 1945 (Western Australia)

Regulation(s) name

Electricity (Network Safety) Regulations 2015 (Western Australia)

Contact details

Licensing Enquiries
Department of Commerce
EnergySafety


Operating address:
Level 1, Mason Bird Building
303 Sevenoaks Street
Cannington
Western Australia 6107
Mailing address:
Locked Bag 14
Cloisters Square PO
Western Australia 6850

Phone:

1800678198

Phone:

08 62512000

Fax:

08 62511902
energylicensing@commerce.wa.gov.au

Supporting information

Disclaimer

The information contained on the Australian Business Licence and Information Service (ABLIS) web site, or via packages or other sources is intended for general guidance only.

To the full extent permitted by law, the Federal, State, Territory and Local Governments make no representations or warranties (expressed or implied) in relation to the information, including its accuracy, currency or completeness.

The business information provided does not constitute professional or legal advice, nor is the use of any third party resource an endorsement of the information contained, the associated organisation, product or service. It is recommended that you obtain appropriate professional and /or independent legal advice to ensure that the material provided here is relevant to your particular circumstances.

To the full extent permitted by law the Federal, State, Territory and Local Governments, their employees and agents do not accept any liability for any reason, including without limitation, liability in negligence, to any person for the general information which is provided herein, or in respect of anything, including the consequences of anything done, or not done, by any such person in whole or partial reliance upon the information.