Australian Standard AS 1304-1991 - Western Australia

Service summary

You will be required to comply with this standard if you intend to design or construct a precast concrete septic tank, or an in situ concrete septic tank. The walls of cylindrical septic tanks must be reinforced with steel mesh complying with this standard.

This standard has been superseded and is referred to in the catalogue of Australian Standards as AS/NZS 4671:2001 Steel reinforcing materials. It specifies requirements for the chemical composition and the mechanical and geometrical properties of reinforcing steel used for the reinforcement of concrete.

Please consult the Contact Officer for more information and to ascertain the level of compliance (if any) that may be required by your business.

Service type

Code of Practice

A code of practice can be either a legal requirement or non-legal requirement. Legal codes of practice are defined as a result of legislation. Non-legal codes of practice are defined by industry regulators and bodies.

Other resources

 Resources
Comply

Australian Standard AS 1304-1991 - Please consult the Contact Officer for information on this document.

Administering agency

Department of Health
Public Health
Environmental Health Directorate

Act(s) name

Health Act 1911 (Western Australia)

Regulation(s) name

Health (Treatment of Sewage and Disposal of Effluent and Liquid Waste) Regulations 1974 (Western Australia)

Contact details

Enquiries
Department of Health
Public Health
Environmental Health Directorate


Operating address:
2nd Floor, B Block
189 Royal Street
East Perth
Western Australia 6004

Phone:

08 93884999

Fax:

08 93884905
ehinfo@health.wa.gov.au

Supporting information

Disclaimer

The information contained on the Australian Business Licence and Information Service (ABLIS) web site, or via packages or other sources is intended for general guidance only.

To the full extent permitted by law, the Federal, State, Territory and Local Governments make no representations or warranties (expressed or implied) in relation to the information, including its accuracy, currency or completeness.

The business information provided does not constitute professional or legal advice, nor is the use of any third party resource an endorsement of the information contained, the associated organisation, product or service. It is recommended that you obtain appropriate professional and /or independent legal advice to ensure that the material provided here is relevant to your particular circumstances.

To the full extent permitted by law the Federal, State, Territory and Local Governments, their employees and agents do not accept any liability for any reason, including without limitation, liability in negligence, to any person for the general information which is provided herein, or in respect of anything, including the consequences of anything done, or not done, by any such person in whole or partial reliance upon the information.