Australian New Zealand Standard AS / NZS 3509:2003 LP Gas Fuel Vessels for Automotive Use - Western Australia

Service summary

You may be required to comply with this standard if you intend to design liquid petroleum (LP) gas fuel vessels for automotive use. In order to register your designs with the Agency, you must ensure that they comply with the requirements of this standard.

This standard specifies requirements for welded carbon steel LP gas fuel vessels of total internal volume not greater than 500 litres, and for welded stainless steel LP gas fuel vessels of total internal volume not greater than 200 litres, intended for automotive installations.

Please consult the Contact Officer for more information and to ascertain the level of compliance (if any) that may be required.

Service type

Code of Practice

A code of practice can be either a legal requirement or non-legal requirement. Legal codes of practice are defined as a result of legislation. Non-legal codes of practice are defined by industry regulators and bodies.

Prerequisites

Administering agency

Department of Mines, Industry Regulation and Safety
WorkSafe

Act(s) name

Occupational Safety and Health Act 1984 (Western Australia)

Regulation(s) name

Occupational Safety and Health Regulations 1996 (Western Australia)

Contact details

General Enquiries
Department of Mines, Industry Regulation and Safety
WorkSafe


Operating address:
Level 1, Mason Bird Building
303 Sevenoaks Street
Cannington
Western Australia 6107
Mailing address:
Locked Bag 14
Cloisters Square PO
Western Australia 6850

Phone:

08 6251 2200

Phone:

1300 307 877
safety@dmirs.wa.gov.au

Website:

WorkSafe Western Australia Opens in a new browser window

Disclaimer

The information contained on the Australian Business Licence and Information Service (ABLIS) web site, or via packages or other sources is intended for general guidance only.

To the full extent permitted by law, the Federal, State, Territory and Local Governments make no representations or warranties (expressed or implied) in relation to the information, including its accuracy, currency or completeness.

The business information provided does not constitute professional or legal advice, nor is the use of any third party resource an endorsement of the information contained, the associated organisation, product or service. It is recommended that you obtain appropriate professional and /or independent legal advice to ensure that the material provided here is relevant to your particular circumstances.

To the full extent permitted by law the Federal, State, Territory and Local Governments, their employees and agents do not accept any liability for any reason, including without limitation, liability in negligence, to any person for the general information which is provided herein, or in respect of anything, including the consequences of anything done, or not done, by any such person in whole or partial reliance upon the information.