Australian Standard AS 4041 Pressure Piping - Western Australia

Service summary

You may need to comply with this Standard if you intend to design or manufacture pressure piping. This Standard sets out minimum requirements for the materials, design, fabrication, testing, inspection, reports and pre-commissioning of piping subject to internal pressure or external pressure or both. Specific requirements are given for piping constructed of carbon, carbon-manganese, low alloy and high alloy steels, ductile and cast iron, copper, aluminium, nickel, titanium and alloys of these materials.

While compliance with this standard is not mandatory, it may be used to demonstrate that you have complied with your legal obligations. Please consult the Agency Contact Officer for more information and to ascertain the level of compliance (if any) that may be required.

Service type

Code of Practice

A code of practice can be either a legal requirement or non-legal requirement. Legal codes of practice are defined as a result of legislation. Non-legal codes of practice are defined by industry regulators and bodies.

Other resources

Administering agency

Department of Mines and Petroleum
Resources Safety

Act(s) name

Dangerous Goods Safety Act 2004 (Western Australia)

Contact details

Head Office, Resources Safety
Department of Mines and Petroleum
Resources Safety


Operating address:
Level 2
1 Adelaide Terrace
East Perth
Western Australia 6004
Mailing address:
100 Plain Street
East Perth
Western Australia 6004

Phone:

08 93588002

Fax:

08 93588000
ResourcesSafety@dmp.wa.gov.au

Supporting information

Disclaimer

The information contained on the Australian Business Licence and Information Service (ABLIS) web site, or via packages or other sources is intended for general guidance only.

To the full extent permitted by law, the Federal, State, Territory and Local Governments make no representations or warranties (expressed or implied) in relation to the information, including its accuracy, currency or completeness.

The business information provided does not constitute professional or legal advice, nor is the use of any third party resource an endorsement of the information contained, the associated organisation, product or service. It is recommended that you obtain appropriate professional and /or independent legal advice to ensure that the material provided here is relevant to your particular circumstances.

To the full extent permitted by law the Federal, State, Territory and Local Governments, their employees and agents do not accept any liability for any reason, including without limitation, liability in negligence, to any person for the general information which is provided herein, or in respect of anything, including the consequences of anything done, or not done, by any such person in whole or partial reliance upon the information.