AS 2187.1: Explosives - Storage, Transport and Use - Storage - Australian Capital Territory

Description

You must comply with the requirements listed in this standard if you intend to store or use explosives. You will be required to comply with the separation distances for the safe storage of explosives. The standard specifies requirements for the safe use of explosives including the mixing, testing, initiation and firing of charges. It also provides information on:

  • Misfires
  • Ground vibration
  • Air blasting
  • Blasting in hot material
  • Blasting under water
  • Demolition by blasting
  • Material handling equipment
  • The design, construction and maintenance of magazines.

The standard does not apply to the storage of explosives and explosive ordnance for defence purposes which comply with the Defence Explosives Manual. It should be noted that there is an inconsistency clause listed in the Act where regulations that are in conflict with approved codes of practice are to be complied with. Any requirement of this code that is in conflict with what a regulation states may be ignored, and the regulation complied with.

Please consult the Contact Officer for more information and to ascertain the level of compliance that may be required.

Service type

Code of Practice

A code of practice can be either a legal requirement or non-legal requirement. Legal codes of practice are defined as a result of legislation. Non-legal codes of practice are defined by industry regulators and bodies.

Administering agency

Chief Minister, Treasury and Economic Development Directorate

Access Canberra

WorkSafe ACT

Contact details

Contact Email, Phone and Address Details for this service in simple two column table format, header then data.

General Enquiries

Phone: 02 62073000
Fax: 02 62050336