Code of Practice for the Management and Control of Asbestos in Workplaces [NOHSC: 2018 (2005)] - Australian Capital Territory

Description

You will be required to comply with this code of practice if asbestos-containing materials (ACM) have been identified in your workplace. The code outlines strategies for:

  • Identifying all ACM in the workplace;
  • Risk assessment; and
  • Control measures to prevent the generation of, or exposure to, airborne asbestos fibres.

The decision to remove ACM should be made on the basis of a risk assessment. This code of practice provides guidance on managing and controlling ACM in the workplace, when the removal of ACM is required or recommended there is a separate code that must be complied with.

It should be noted that there is an inconsistency clause listed in the Act where regulations that are in conflict with approved codes of practice are to be complied with. Any requirement of this code that is in conflict with what a regulation states may be disregarded, and the regulation complied with.

Please consult the Contact Officer for more information and to ascertain the level of compliance that may be required.

Service type

Code of Practice

A code of practice can be either a legal requirement or non-legal requirement. Legal codes of practice are defined as a result of legislation. Non-legal codes of practice are defined by industry regulators and bodies.

Administering agency

Chief Minister, Treasury and Economic Development Directorate

Access Canberra

WorkSafe ACT

Contact details

Contact Email, Phone and Address Details for this service in simple two column table format, header then data.

General Enquiries

Phone: 02 62073000
Fax: 02 62050336