Approval to Install or Alter a Waste Control System - Copper Coast Council - South Australia

Description

You will need this approval if you intend to install a waste control system. A waste control system includes any fixture, fitting, appliance, plant or process that collects and manages commercial or industrial waste, including:

  • human waste
  • water that has been used in washing, laundering, bathing or showering
  • water containing food or beverage waste.
Capacity of waste control systems is referred to as equivalent persons or EP.

Service type

Licence

A licence defines the need to obtain recognition / certification and registration to undertake a certain business activity.

Eligibility requirements

Please contact the agency to identify any eligibility requirements.

Duration

As specified

Fees

Fees Details for this service in table format.

Task Type Business Structure Amount Description
Apply Application All -

Installation or alteration of temporary on-site water water system:

  • capacity up to 10 EP - $53.50
  • capacity exceeds 10 EP - $107.00 plus $26.25 for each 2 EP in excess of 10 EP.

Fees for 2022-23

Apply Application All -

Installation or alteration of an on-site waste water system (other than temporary):

  • up to 10 EP - $119.00
  • more than 10 EP - $119.00 plus $26.25 for each 2 EP in excess of 10 EP.

Fees for 2022-23

Apply Application All -

Connection of an on-site wastewater system to a community wastewater management system:

  • existing on-site wastewater systems - $119.00
  • new on-site wastewater systems up to 10 EP
  • new onsite wastewater systems more than 10 EP - $119.00 plus $26.25 for each 2 EP above 10 EP.

Fees for 2022-23

Apply Inspection All $133.00

Fees for 2022-23

Vary Variation All $119.00 Variation or renovation of condition of wastewater works approval (council). Fees for 2022-23

Other resources

Administering agency

Copper Coast Council

Contact details

Contact Email, Phone and Address Details for this service in simple two column table format, header then data.