Australian Standard 2676: Installation and Maintenance of Batteries in Buildings - Western Australia

Description

You will be required to comply with this standard if you are the occupier of a public building. Any room or enclosure in which batteries with a stored capacity exceeding 1 kw.h or with a floating voltage exceeding 115 must conform to the installation requirements of this standard.

This standard is referred to as AS 2676.1-1992: Guide to the installation, maintenance, testing and replacement of secondary batteries in buildings - Vented cells. This Standard sets out recommended practices for the installation, maintenance, testing and replacement of vented secondary batteries permanently installed in or on buildings.

Please consult the Contact Officer for more information and to ascertain the level of compliance (if any) that may be required by your business.

Service type

Code of Practice

A code of practice can be either a legal requirement or non-legal requirement. Legal codes of practice are defined as a result of legislation. Non-legal codes of practice are defined by industry regulators and bodies.

Other resources

Task Business Structure Resources
Comply All Australian Standard 2676: Installation and Maintenance of Batteries in Buildings - Please consult the Contact Officer for information on this document.

Act(s) name

Health (Miscellaneous Provisions) Act 1911 WA

Regulation(s) name

Health (Public Buildings) Regulations 1992 WA

Administering agency

Department of Health

Public Health

Environmental Health Directorate

Contact details

Contact Email, Phone and Address Details for this service in simple two column table format, header then data.

Enquiries

Environmental Health Directorate

Public Health

Department of Health

Operating address: 2nd Floor, B Block
189 Royal Street
East Perth
Western Australia 6004
Phone: 08 9388 4999
Fax: 08 9388 4905
Email: ehinfo@health.wa.gov.au