Australian Standard AS 2885.2-2007 Pipelines - Gas and Liquid Petroleum - Welding - Western Australia

Description

You must comply with this standard if you intend to weld pipelines that carry gas and liquid petroleum. You may be required to comply with this standard if you are a registered gas fitter.

This standard specifies the minimum requirements for materials, welding consumables, welding processes, weld preparations, qualifications of welding procedures and personnel, and fabrication and inspection requirements for the construction and maintenance welding of carbon and carbon-manganese steel pipelines down to 3.2 mm wall thickness, designed and constructed in accordance with AS 2885.1-2007.

Please consult the Contact Officer for more information and to ascertain the level of compliance that may be required.

Service type

Code of Practice

A code of practice can be either a legal requirement or non-legal requirement. Legal codes of practice are defined as a result of legislation. Non-legal codes of practice are defined by industry regulators and bodies.

Act(s) name

Gas Standards Act 1972 WA

Regulation(s) name

Gas Standards (Gasfitting and Consumer Gas Installations) Regulations 1999 WA

Administering agency

Department of Mines, Industry Regulation and Safety

EnergySafety

Contact details

Contact Email, Phone and Address Details for this service in simple two column table format, header then data.

General Enquiries

EnergySafety

Department of Mines, Industry Regulation and Safety

Operating address: Level 1, Mason Bird Building
303 Sevenoaks Street
Cannington
Western Australia 6107
Mailing address: Locked Bag 14
Cloisters Square PO
Western Australia 6850
Phone: 08 6251 1900
Fax: 08 6251 1901
Email: energysafety@dmirs.wa.gov.au
Website: EnergySafety (Opens in new window)