Australian Standard AS 3007.5: Electrical Installations - Surface Mines and Associated Processing Plant - General Protection Requirements - Western Australia

Description

You will be required to comply with this standard if you are a manager or employer at a mine, and you intend to move vehicles or machinery within the vicinity of overhead powerlines.

The version of the standard you will be required to comply with is AS 3007.5-2004

This standard specifies the normal operating procedures which should be carried out to ensure the safety of personnel. You must comply with the minimum clearances between overhead powerlines and vehicles or machinery.

Please consult the Contact Officer for more information and to ascertain the level of compliance (if any) that may be required.

Service type

Code of Practice

A code of practice can be either a legal requirement or non-legal requirement. Legal codes of practice are defined as a result of legislation. Non-legal codes of practice are defined by industry regulators and bodies.

Act(s) name

Mines Safety and Inspection Act 1994 WA

Regulation(s) name

Mines Safety and Inspection Regulations 1995 WA

Administering agency

Department of Mines, Industry Regulation and Safety

Resources Safety

Contact details

Contact Email, Phone and Address Details for this service in simple two column table format, header then data.

Mine Safety

Resources Safety

Department of Mines, Industry Regulation and Safety

Operating address: Level 2
1 Adelaide Terrace
East Perth, Western Australia 6004
Mailing address: 100 Plain Street
East Perth, Western Australia, 6004
Phone: 08 9358 8010
Email: MinesSafety@dmirs.wa.gov.au
Website: Resources Safety (Opens in new window)