Australian Standard AS 3011.1-1992 Electrical Installations - Secondary Batteries Installed in Buildings - Vented Cells - Western Australia

Description

You are required to comply with this standard if you plan on permanently installing in or on buildings, structures or premises vented secondary batteries with a nominal voltage exceeding 24 V and a capacity exceeding 10 A.h at the 1 h rate of discharge. This standard only applied to vented cells.

Please consult the Contact Officer for more information and to ascertain the level of compliance that may be required.

Service type

Code of Practice

A code of practice can be either a legal requirement or non-legal requirement. Legal codes of practice are defined as a result of legislation. Non-legal codes of practice are defined by industry regulators and bodies.

Act(s) name

Electricity Act 1945 WA

Regulation(s) name

Electricity (Licensing) Regulations 1991 WA

Administering agency

Department of Mines, Industry Regulation and Safety

EnergySafety

Contact details

Contact Email, Phone and Address Details for this service in simple two column table format, header then data.

General Enquiries

EnergySafety

Department of Mines, Industry Regulation and Safety

Operating address: Level 1, Mason Bird Building
303 Sevenoaks Street
Cannington
Western Australia 6107
Mailing address: Locked Bag 14
Cloisters Square PO
Western Australia 6850
Phone: 08 6251 1900
Fax: 08 6251 1901
Email: energysafety@dmirs.wa.gov.au
Website: EnergySafety (Opens in new window)