Australian Standard AS 1033.2 - 1988 High Voltage Fuses (for Rated Voltages Exceeding 1000V) - Current Limiting (Powder Filled) Type - Western Australia

Description

You must comply with this standard if you are an electricity network operator or electrical contractor and intend to design, construct, commission, operate, maintain or decommission an electricity network.

This standard specifies requirements for all types of high voltage current-limiting (powder-filled) fuses designed for use outdoors or indoors on alternating current systems of 50 hertz and 60 hertz and of rated voltages exceeding 1000 volts. Fuses provided with fuse-links equipped with an indicating device or a striker come within the scope of this standard, but the correct operation of the striker in combination with the tripping device of a switch is outside the scope of this standard. This standard does not cover expulsion and similar type fuses or the application of high voltage fuses.

Please consult the Contact Officer for more information and to ascertain the level of compliance that may be required by your business.

Service type

Code of Practice

A code of practice can be either a legal requirement or non-legal requirement. Legal codes of practice are defined as a result of legislation. Non-legal codes of practice are defined by industry regulators and bodies.

Administering agency

Department of Mines, Industry Regulation and Safety

EnergySafety

Contact details

Contact Email, Phone and Address Details for this service in simple two column table format, header then data.

General Enquiries

Operating address: Level 1, Mason Bird Building
303 Sevenoaks Street
Cannington
Western Australia 6107
Mailing address: Locked Bag 14
Cloisters Square PO
Western Australia 6850
Phone: 08 6251 1900
Fax: 08 6251 1901
Email: energysafety@dmirs.wa.gov.au
Website: EnergySafety (Opens in new window)