Australian Standard 2885.1-2007 Pipelines - Gas and Liquid Petroleum - Design and Construction - Western Australia

Service summary

You may be required to comply with this standard if you are a network operator. A network operator operates a gas distribution system. Please be advised the standard referenced in legislation has since been superseded, you are now required to comply with Australian Standard 2885.1-2012 Pipelines - Gas and Liquid Petroleum - Design and Construction.

The network operator must comply with this standard in the creation of a safety case. A safety case is a document that sets out the safety management and technical practices and procedures for a gas distribution system.

This standard specifies requirements for design and construction of carbon and carbon-manganese steel pipelines and associated piping and components that are used to transmit single-phase and multi-phase hydrocarbon fluids, such as natural and manufactured gas, liquefied petroleum gas, natural gasoline, crude oil, natural gas liquids and liquid petroleum products.

Please consult the Contact Officer for more information and to ascertain the level of compliance (if any) that may be required.

Service type

Code of Practice

A code of practice can be either a legal requirement or non-legal requirement. Legal codes of practice are defined as a result of legislation. Non-legal codes of practice are defined by industry regulators and bodies.

Administering agency

Department of Mines, Industry Regulation and Safety

Act(s) name

Gas Standards Act 1972 (Western Australia)

Regulation(s) name

Gas Standards (Gas Supply and System Safety) Regulations 2000 (Western Australia)

Contact details

General Enquiries
Department of Mines, Industry Regulation and Safety

Operating address:
Level 1, Mason Bird Building
303 Sevenoaks Street
Western Australia 6107
Mailing address:
Locked Bag 14
Cloisters Square PO
Western Australia 6850


08 6251 1900


08 6251 1901


EnergySafety Opens in a new browser window

Supporting information


The information contained on the Australian Business Licence and Information Service (ABLIS) web site, or via packages or other sources is intended for general guidance only.

To the full extent permitted by law, the Federal, State, Territory and Local Governments make no representations or warranties (expressed or implied) in relation to the information, including its accuracy, currency or completeness.

The business information provided does not constitute professional or legal advice, nor is the use of any third party resource an endorsement of the information contained, the associated organisation, product or service. It is recommended that you obtain appropriate professional and /or independent legal advice to ensure that the material provided here is relevant to your particular circumstances.

To the full extent permitted by law the Federal, State, Territory and Local Governments, their employees and agents do not accept any liability for any reason, including without limitation, liability in negligence, to any person for the general information which is provided herein, or in respect of anything, including the consequences of anything done, or not done, by any such person in whole or partial reliance upon the information.