ISO 8383:1985 (Lifts on Ships Specific Requirements) - Australian Government

Description

You must comply with this code if you are the operator of a Regulated Australian Vessel, or if you are the operator of a foreign vessel that is;

  • In an Australian port; or
  • Entering or leaving an Australian port; or
  • In the internal waters of Australia; or
  • In the territorial sea of Australia, other than in the course of innocent passage.

This standard only applies to lifts that are installed for the use of passengers and seafarers; it does not apply to cargo lifts. It lays down requirements for design, installation and inspection. It is necessary to ensure compliance with such statutory requirements, rules and regulations as may be applicable to any individual ship as well as with lift safety codes.

Please consult the Contact Officer for more information and to ascertain the level of compliance (if any) that may be required.

Service type

Code of Practice

A code of practice can be either a legal requirement or non-legal requirement. Legal codes of practice are defined as a result of legislation. Non-legal codes of practice are defined by industry regulators and bodies.

Other resources

Act(s) name

Navigation Act 2012 AG

Regulation(s) name

Navigation Regulations 2013 AG

Administering agency

Australian Maritime Safety Authority

Navigation Safety and International Division

Contact details

Contact Email, Phone and Address Details for this service in simple two column table format, header then data.

Enquiries

Navigation Safety and International Division

Australian Maritime Safety Authority

Operating address: 82 Northbourne Avenue
Braddon
Australian Capital Territory 2612
Mailing address: GPO BOX 2181
Canberra, Australian Capital Territory 2601
Phone: 02 6279 5664
Fax: 02 6279 5966